HOW TO SPECIFY / ORDER MILD STEEL GRATING

• Use the quick reference load charts or the main load charts to determine a suitable load bar size and series to suit your loading requirements. Eg- 255/1 or 325/2 etc...
• Designate at the end of the code with an S if you require a Serrated surface, No designation will be assumed a Plain surface.

*check which grating options are available with a serrated surface within the load charts

• Designate that the product you require is Mild Steel by referencing M = Mild Steel grating
• Designate the finish you require:
  • U = Black (untreated / raw finish)
  • G= Hot dip galvanised to AS/NZS 4680
  • P = Powder coated finish

• Specify the size of the area or panel size(s) for the grating you require along with the load bar direction (span)
• Specify any additional information we need to know for example if there are cut outs or penetrations in the grating, do we need to split cut outs between panels for installation, is kick plate required, are the grates banded or cut to size only etc....

EXAMPLES OF ORDERING / SPECIFYING MILD STEEL GRATING

405/ 1 MU = 40x5mm plain load bars (series 1 grating, load bars at 30mm centres, cross bars at 100mm centres) Mild Steel, Untreated finish
325/2S MG = 32x5mm Serrated load bars (series 2, load bars at 40mm centres, cross bars at 100mm centres) Mild Steel, Galvanised finish.