KICK PLATE MOUNTING BRACKET DETAIL

* Slot on kick plate mounting bracket allows 7mm up/down adjustment

* Kick plate mounting brackets will be positioned on the right hand side of stanchion when viewed from the walking surface unless specified otherwise or drilled left side only

* If kick plate mounting brackets are required on stanchions this needs to be clearly specified at the time or ordering / quoting

* Kick plate can be bolted or welded to the kick plate mounting bracket.  Slot is designed for an M12 bolt.

* To comply with AS1657 you must have a minimum of 100mm of kick plate above the wakling surface, and a maximum gap of 10mm between the walking surface and the underside of the kick plate.