Available in Steel, Aluminium and FRP options.
Stair treads can be manufactured at any width and length to suit your application. In steel and aluminium, stair treads can be supplied with a banded end / welded fixing or bolted end to suit your requirements. To compliment our stair treads we can also provide them with no nosing, a floor plate nosing, or a yellow abrasive nosing to best suit your application.
Stair tread Types: Mild steel and Aluminium
*Photos above show stair treads manufactured from mild steel galvanised grating.
Recommended maximum span and widths for mild steel and aluminium stair treads
Standard end plates: mild steel and aluminium stair treads
Standard endplates are manufactured from 65x5mm flat bar for grating up to 40mm in depth. Nonstandard endplates can be made on request to suit your requirements.
Please click on the attached links to see the standard end plates we supply for our mild steel and aluminium stair treads
Toe boards on stair treads:
Toe boards can be incorporated into any mild steel and aluminium stair tread options. A toe board is typically a flat bar welded to the back edge of a stair tread to close the openings between risers. Toe boards are optional and need to be specified at the time of ordering / quoting if required.
FRP stair treads:
FRP stair treads are manufactured from moulded or pultruded FRP grating.
Recommended maximum span and widths for FRP stair treads:
* The recommended maximum spans are for static conditions,deflections for impact loads or dynamic load will be in excess of 5mm.
* Long term loads will result in additional deflections due to creep in the material.
* For applications at elevated temperatures, please consult Steel Grating Ltd.
* Moulded stair tread spans are based on whole square dimensions as this is what is required for the installation of moulded FRP stair treads.
Installation of FRP stair treads:
FRP stair treads require a minimum of 40mm support surface at each end of the stair tread to sit on, and require 4 off stainless steel M clips, nuts and bolts for fixing to the support.